|
Auto ID
Connectivity |
|
MS-Connect 210 is
designed to simply connectivity of Microscan readers in industrial
application. This factory ready wiring box
replaced the MS Connect 200
 |
|
 MS-Connect 5100
services as a data collector and
manager for automatic ID net works with
Microscan Readers. Able
to connect and configure up to 32 readers in minutes.
 |
|
Auto ID
Accessories |
|
QX-1 interface
device is a powerful accessory to complement and simplify
installation of QX Platform products. Featuring the Quick Connect
system with M12 Ultra-Lock connectors, and IP65 industrial sealing,
the QX-1 device distributes power, communications, and I/O.
|
|
IB-131 The IB-131 interface box simplifies scanner connection for the MS-911 and
MS-820 scanners by providing a direct 10-28V connection to the host, power
supply, and external triggering device. The IB-131 may be used in single
drop, multidrop, or daisy chain configurations.
 |
IB-150 Series
IB-150 - interface simplifies connectivity by linking the Quadrus EZ to the host, power supply, trigger, and aux port connections.
IB-151 - standard Ethernet and USB connections can be made
through the IB-151, which plugs directly into the host port of the Quadrus EZ
IB-152 - custom terminal strip wiring can be done through IB-152
interface, which can connect directly to EZ or by way of aux port to the
|
|
IB-3 Series
 IB-3PC -
is a dual-purpose interface that operates in: Keyboard Wedge and
Serial Interconnect modes
IC-3USB - allows the MS-3 to be connected to a PC's USB
1.X connector
IC-332 - allows the MS-3 to be connected to the IB-131
|
IB-890
Interface Box The IB-890 Interface Box is an optional
wiring accessory for the MS-890 scanner. The interface box is easy to
wire, and makes switching scanners on the line as easy as removing only 4
standard screws. Using the IB-890 allows external devices such as light
stacks, hand held scanners or stop-line
devices, to be connected and controlled by the scanner.
 |
Power Packs
The Microscan Power Packs are used to power Microscan equipment. The Power
Packs are available in seven different configurations.
|
Mounting Arms
The Microscan mounting arm is a robust device for mounting unattended bar
code scanners in virtually any environment, including industrial
applications.
The arm is made of marine-grade powder-coated aluminum. The ball (which
forms the joint) is made of injection-molded rubber, which grips the mount
firmly in place and minimizes any movement or vibration to the scanner. Mounting arms can be rotated almost any direction, allowing for flexible
positioning of your bar code scanner.
|
Mounting Plates
The Microscan scanner mounting plates are designed for the easy attachment
of scanners in your particular application. The mounting plates are a flat
attachment with pre-drilled holes that align with specified scanners.
Mounting plate kits include required mounting hardware. |
|
Auxiliary Lighting
In many bar code applications, such as automotive, aerospace, and
electronics, auxiliary lighting can be helpful, or even essential for
increasing contrast and readability of symbols.
Each light has different illumination characteristics which suit them to
different application requirements. All of the lights offered here are made
to industrial-grade standards to withstand wear and tear, dust, and other
harsh environmental conditions.
|
Right Angle Mirrors
Right angle beam projection is available for all
our scanners. This accessory is useful where alternative mounting is necessary,
particularly in tight places and where a wider scan width is required at
shorter ranges. |
|
 Object Detector
The Microscan Object Detector Kit includes an infrared photo detector
complete with cable, connector, mounting bracket, and screws. When installed
and connected to a Microscan scanner or decoder, it is used to detect
objects within its range and send triggers that initiate read cycles
|
Adapter Box
The Adapter Box (ADP) is a junction that provides connectivity between the
MS-3 scanner, the host or LAN, power input, and trigger devices. The Adapter
Box is also compatible with the MS-610.
|
|
DN120 Device-Net interface box
connects Microscan industrial scanners (MS-820, MS-850, MS-9 and Quadrus)
to a Device-Net
 |
|
MS-Q Charger
Microscan offers a charger accessory
for use with MS-Q. handhled imagers. The charger can either wall or
bench top mount, and can also house the Bluetooth modem. Complete
charge time is approximately 3 to 6 hours. |
|
 MS-Q Protective Jackets
Protective Jackets, for MS-Q handheld imagers,
are designed for rugged industrial
applications. They provide cost-effective protection of your MS-Q imagers
by tripling the drop shock protection.
Provides inexpensive insurance in any rugged application 3X improvement in
MS-Q’s drop-shock protection
Over-hanging front shields the LEDs and optics
|
|
Discontinued Parts |
IB-140
 |
 SDS
Prototcol Box
 |
 IB-105
 |
|
|
|
|
